How to check what MMI do I have

Various types of Audi navigation systems have been discovered, depending on the model, vintage, and equipment of the vehicle. The majority of these systems display the initial screen with the name “Audi MultiMedia Interface,” and the menus look very similar. As a result, they are frequently regarded as the same system.

BNS 4.x, BNS 5.x, MMI 2G Low / Basic, MMI 2G High, MMI 3G Low / Basic, MMI 3G High, MMI 3G Plus, Audi RMC, RNS-D, RNS-E, RNS-E 2010, Audi Concert, Audi Chorus, and Audi Symphony are just a few of the navigation and multimedia systems that Audi has to offer.

How can I identify what MMI do I have? MMI 2G, 3G, 3G +, RMC, or Mib?

The simplest method is to see what software version is currently loaded on the MMI. To achieve this, hit the CAR button to access the vehicle’s menu, then press SETUP or MENU to choose the “Version” submenu, and finally, select the value from the line denoted by the letters “SW.”

Newer vehicles use a unique red engineering menu (REM) access key system.

To enter the Red Engineering Menu in older vehicles (mainly those made up to 2016), use one of the key shortcuts listed below.

Types of MMI & software versions

Audi Concert: 8R1XXXXXXX

Unfortunately, we do not have any updates for this basic Audi radio

MMI 2G: SW: XX-XX XX.X.X XXXX

Mostly in Audi A4 (2009-10), Audi A5 (2008-09), Audi A6 (2005-09), Audi A8 (2002-11), Audi Q7 (2007-09), and the RS6 (2008-2011)

MMI 3G Low/Basic: BNav_XX_XXXXX

Mostly in Audi A4 (2010-13), Audi A6 (2009-2012), Audi Q5 (2009-13), and Audi Q7 (2009-12)

MMI 3G High: HNav_XX_XXXXX

Mostly in Audi A4 (2010-13), Audi A5 (2010-13), Audi Q5 (2010-13), Audi Q7 (2010-13) and Audi A8 (2009-2010)

MMI 3G+: HN+_XX_XXXXX or HN+R

Mostly in Audi A1 (2011-2018), Audi A4(2013-17), Audi A5(2009-18), Audi Q3(2015-19), Audi Q5(2013-2018), Audi Q7(2013-2018), A6(2012-16), A7(2012-16), and A8(2011-19)

MMI RMC: RMC_XX_XXXXX

Mostly in Audi A1 (2010-2018), Audi A3 (2013-2018), Audi A6 (2011-2017), Audi A7 (2010-2017), Audi Q3 (2011-2018)

MMI Mib1: MHIG_XX_XXXX

Mostly in Audi A3 (2013 – 2017)

MMI MSTD: MSTD_XX_XXXX

Mostly in Audi A3

MMI Mib2: MHI2_XX_XXXX

Mostly in Audi A4 (2017 – 2019), Audi A6 (2017 – 2019), Audi A7 (2017 – 2019), Audi A8 (2018 – 2019)

MMI Mib2: MHI2Q_XX_XXXX

MMI Mib High Scale 2: MHS2_XX_XXX

MMI Mib2: MH2p_XX_XXX

This ought to assist you in selecting the correct firmware version for your vehicle. Any inquiries? Just leave a comment or get in touch with us through our contact page.

Important information on firmware upgrades and selecting the right firmware

Make sure you choose the correct update while looking for updates. Check what firmware you now have by looking at the name’s beginning. For example, if you have HN+ EU AU3G P0432, you should upgrade to the most recent firmware, which is currently HN+ EU AU3G K0942 for the devices mentioned above. In their first year of manufacture, only the Audi A6 C7 and Audi A8 D4 had firmware with a version number beginning with HN+ XX; however, while seeking for upgrades, one must receive HN+R (Audi has changed the firmware name for the A6/A8).